Washing Machine fault

Washing machine doesn't spin?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
An unevenly distributed load, or a blocked pump or drain filter.
Try first
Redistribute the laundry, check the pump filter and drain hose.
Technician for
A faulty pump, door lock or motor.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the washing machine not spin?

Failure to spin can be caused by an overloaded or unevenly distributed load, a clogged drain preventing spinning for safety reasons, or a worn carbon brush in the motor.

1
Uneven or too heavy load
The machine skips spinning or stops when the laundry is unevenly spread in the drum.
2
Blocked pump filter or drain
If the water cannot drain, the programme does not move on to spinning.
3
Kinked or blocked drain hose
The water then cannot flow away properly.
4
Faulty door lock
The machine only spins when it is sure the door is closed.
5
Faulty pump, motor or electronics
This is more common in older machines and needs a technician.

Check it yourself

What you can check yourself

Distribute the laundry evenly and check that the drain filter isn't blocked, since most machines won't spin while water remains due to safety features.

Safety firstSwitch the machine off and unplug it before checking anything. Water may come out of the machine, so have a towel and a shallow tray ready.
1
Switch the machine off and unplug it.
2
Pull the laundry apart, spread it evenly and start a spin-only programme.
3
Check that the drain hose is not kinked or squashed.
4
Clean the pump filter (often behind a small flap at the bottom). Have a towel ready, water will come out.
5
Check that the door closes fully and nothing is trapped.

Technician

When do you call a technician?

If the problem persists with a light, even load and a clean filter, there is likely a technical fault with the motor, drive belt or electronics.

Water stays in the drum after the wash.
The machine still does not spin after these checks.
You hear humming or cracking noises.
The same error code keeps appearing on the display.
The machine smells burnt.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Why does water stay in the drum?

Usually the pump filter or drain is blocked, or the pump itself is faulty. See also our page about a washing machine that does not drain.

Can an overloaded machine be the cause?

Yes. With a very heavy or unevenly distributed load, many machines skip the spin cycle to prevent damage.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online