Dishwasher fault

Dishwasher doesn't wash properly?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
A dirty filter, blocked spray arms or wrong loading.
Try first
Clean the filter and arms, load differently and try another detergent.
Technician for
A faulty pump or a temperature that is too low.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the dishwasher not clean properly?

Dishes not coming out clean is often caused by blocked spray arms, incorrect detergent dosing, or an overloaded machine.

1
Dirty filter
Food remains are sprayed over the dishes again.
2
Blocked spray arms
The water does not reach every spot.
3
Wrongly or overloaded
Dishes shield each other from the water.
4
Unsuitable or too little detergent
Especially with a short or eco wash and hard water.
5
Temperature too low or faulty pump
The water does not spray strongly or is not hot enough.

Check it yourself

What you can check yourself

Remove the spray arms and rinse the small holes clean under the tap. Also check that dishes aren't packed too tightly together.

Safety firstSwitch the dishwasher off, unplug it and let it cool down. There may be hot or dirty water inside the machine.
1
Switch the machine off and unplug it.
2
Clean the filter and check the spray arms for blockages.
3
Load the dishes so water can reach everywhere, and do not overload.
4
Use a good dishwasher detergent in the right dose and, in hard water, also salt and rinse aid.
5
Choose a warmer programme and run a maintenance programme now and then.

Technician

When do you call a technician?

If the spray arms and dosing are fine but washing results remain poor, the heating element may not be functioning optimally.

The dishes stay dirty after all these checks.
The spray arms do not turn or spray weakly.
There is limescale or a greasy film on the dishes.
The water does not get warm.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Do I need to pre-rinse?

Removing large food remains is enough. Pre-rinsing is usually not necessary.

Does a maintenance programme help?

Yes, a maintenance programme or descaler removes grease and limescale from the machine.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online