Dishwasher fault

Dishwasher doesn't dry properly?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
Empty rinse aid or a programme without a drying phase.
Try first
Refill the rinse aid, try another programme and check the loading.
Technician for
A faulty heating element or thermostat.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the dishwasher not dry the dishes properly?

Damp dishes after the cycle often result from an empty rinse aid dispenser, a wrong programme without a drying phase, or a heating element that no longer works optimally.

1
Rinse aid has run out
Without rinse aid, droplets stay on the dishes and they dry poorly.
2
Eco or short programme
At low temperatures the dishes dry less well.
3
Wrongly loaded or overloaded
Water stays in hollows; plastic dries poorly anyway.
4
Dirty filter
A blocked filter hinders draining and drying.
5
Faulty heating element or thermostat
The water does not get hot enough for drying.

Check it yourself

What you can check yourself

Check there's enough rinse aid in the dispenser and choose a programme with a drying phase rather than a short eco cycle.

Safety firstSwitch the dishwasher off, unplug it and let it cool down. There may be hot or dirty water inside the machine.
1
Check and refill the rinse aid.
2
Choose a programme with a higher temperature or a drying phase.
3
Load the dishes differently so water can run off, and do not overload.
4
Clean the filter at the bottom of the machine.
5
Leave the door ajar afterwards so steam can escape.

Technician

When do you call a technician?

If there's enough rinse aid and you're using a proper programme but dishes stay damp, the heating element is likely defective.

The dishes stay wet despite rinse aid and a hot programme.
Water remains in the machine.
The water does not get warm.
An error code for heating appears.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Does plastic always dry worse?

Yes, plastic holds less heat. That is normal and not a fault.

Is rinse aid really necessary?

It helps water run off the dishes, and is a common reason for dishes staying wet.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online