Dryer fault

Dryer stops mid-cycle?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
A full condensation tray, a full filter or overheating.
Try first
Empty the tray, clean the filter, reduce the load and let it cool.
Technician for
A faulty sensor, thermostat or electronics.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the dryer stop halfway through the programme?

A dryer stopping mid-cycle often does so as a safety measure: for example due to overheating, a full lint filter, or a blocked air channel.

1
Full condensation tray
On condenser dryers the programme stops or gives a warning when the tray is full.
2
Full filter or blocked airflow
The dryer gets too hot and switches off.
3
Too much laundry
An overfull drum dries poorly and can make the dryer cut out.
4
Thermal cut-out
It switches the dryer off when it overheats.
5
Faulty moisture sensor or electronics
The dryer thinks the laundry is done, or fails halfway.

Check it yourself

What you can check yourself

Let the dryer cool down, clean the lint filter thoroughly, and check the ventilation openings aren't blocked.

Safety firstAlways unplug the dryer before working on it. The drum and parts can be hot after use.
1
Switch the dryer off and unplug it.
2
Empty the condensation tray and clean the filter and filter compartment.
3
Take part of the laundry out of the drum.
4
Let the dryer cool for an hour and start again.
5
On a vented dryer, check that the hose is clear and not kinked.

Technician

When do you call a technician?

If the dryer keeps stopping despite a clean filter and proper ventilation, there may be a sensor or heating problem needing inspection.

The dryer keeps stopping halfway.
An error code or a light for the tray or filter appears.
The outside of the dryer gets very hot.
You smell something burning.
The clothes are still wet when it stops.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Is it bad if the dryer stops halfway?

Usually the cause is a full tray or filter. If it keeps happening, overheating can cause damage.

Why does it only stop after a while?

Then the appliance slowly gets too warm. Clean the filter and the airways.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online