Dryer fault

Dryer doesn't start?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
No power, a door that does not close properly or the child lock.
Try first
Check the plug, circuit, door and child lock.
Technician for
A faulty door switch, thermal cut-out or control board.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the dryer not start?

A dryer that won't start is often due to a door not fully closed, a power issue, or a full water tank on a condenser dryer.

1
No power
Plug, socket or a tripped circuit.
2
Door not closed properly
The dryer only starts when the door switch senses the door is closed.
3
Child lock or no programme selected
The dryer does not respond to the start button.
4
Thermal cut-out after overheating
The dryer switches itself off and only starts again when it has cooled down.
5
Faulty door switch, motor or electronics
The dryer does not receive a start signal.

Check it yourself

What you can check yourself

Check the door is closed, empty the water tank if applicable, and confirm the machine has power.

Safety firstAlways unplug the dryer before working on it. The drum and parts can be hot after use.
1
Check the plug and test the socket with another appliance.
2
Check that the circuit in the fuse box has not tripped.
3
Close the door firmly and make sure nothing is trapped.
4
Switch off the child lock (see the manual) and select a programme.
5
Let the dryer cool for an hour, clean the filter and try again.

Technician

When do you call a technician?

If the door is closed, tank is empty and there's power but the dryer still won't start, the door lock or electronics may be defective.

No light at all.
The lights are on but the drum does not turn.
You hear a buzz or click but nothing happens.
The circuit trips when you start the dryer.
The dryer keeps stopping again after a short time.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Why does the dryer not start after a long cycle?

The thermal cut-out may have triggered due to overheating. Let it cool and clean the filter.

What if the circuit trips?

Do not keep trying. Have the dryer, and if needed the installation, checked by a professional.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online