Dryer fault

Dryer doesn't dry properly?

Don't panic. Below you'll find the most common causes, what you can safely check yourself, and when it's time to call a technician.

Book an appointment directly06 84 69 14 69
In short
Usually
A full lint filter or a dirty condenser.
Try first
Clean the filter, empty the condensation tray, do not overfill the drum.
Technician for
A faulty heating element or thermostat.
CausesCheck yourselfTechnicianCostQuestions

Possible causes

Why does the dryer not dry properly?

Poor drying results are usually caused by a full lint filter, a blocked exhaust hose, or an overloaded drum.

1
Full lint filter
A clogged filter blocks airflow, so drying takes much longer.
2
Dirty condenser or heat exchanger
On condenser and heat-pump dryers the heat exchanger fills with dust.
3
Full condensation tray
On many dryers the programme works worse or stops when the tray is full.
4
Blocked exhaust
On a vented dryer a kinked or blocked hose stops moist air from leaving.
5
Faulty heating element or thermostat
The dryer does not get warm enough.

Check it yourself

What you can check yourself

Clean the lint filter after every cycle and make sure the drum isn't overloaded.

Safety firstAlways unplug the dryer before working on it. The drum and parts can be hot after use.
1
Switch the dryer off and unplug it.
2
Clean the lint filter after every use and look in the filter compartment as well.
3
Empty the condensation tray (if fitted).
4
Do not fill the drum more than about three quarters and spin the laundry well beforehand.
5
Clean the condenser or heat exchanger as described in the manual, or check that the hose of a vented dryer is clear.

Technician

When do you call a technician?

If drying remains poor with a clean filter and a normal load, there is likely a deeper issue with air circulation or heating.

Drying time keeps getting longer despite a clean filter.
The clothes stay damp or the dryer hardly gets warm.
An error code about heating or the filter appears.
You smell something burning.

Cost

What does the repair cost?

Fixed rate€69

A visit starts at a fixed starting rate of €69, including call-out costs and diagnosis.

Parts and extra work are discussed with you first; you agree before anything is done.

Frequently asked questions

Frequently asked questions

Why does drying keep taking longer?

Usually the filter or condenser is dirty. As dryers age, the heating element can also weaken.

How often should I clean the filter?

After every drying cycle. A full filter is the most common cause of poor drying.

Available now

Can't fix it yourself?

4.9 ยท Call, email or book online right away. We help fast.

06 84 69 14 69
info@witgoedwsn.nl Book online